Little Bird ELECTRONICS Arduino Uno R3 Compatible

Pedagang : MikroPal
Stok Tersedia
SKU
Arduino001
Rp70.000,00

The Little Bird Uno R3, is a 100% Arduino™ compatible development board.
Just like the original Arduino Uno the Arduino Shield compatible design makes adding expansion boards easy.
This Arduino can be powered from 7-15 VDC or using your computer's USB port (limited aviable current to pins if done so).
This board includes a USB type B Cable.

Fully Arduino-Uno Compatible

ATMEL ATMega328P Microcontroller
http://www.atmel.com/Images/Atmel-42735-8-bit-AVR-Microcontroller-ATmega328-328P_Datasheet.pdf
ATMega16u2 USB-Serial Chipset
Input/Output:
Digital IO: 14 pins (6 are configurable as Digital or PWM)
PWM Capable: 6 pins

Analog Inputs: 6 pins
Serial Ports: 1 (more supported via SoftwareSerial library)
Input voltage:
5V DC Regulated via USB port or 5V pin
7-14V DC via Vin pin or power jack. (On-board regulator supplies 5V when the unit is powered via Vin pin)
Dimensions: 75(W) x 53(L) x 13(H)mm

#Chip DIP seperti gambar ya ATMEGA328P, bukan yang SMD
#Chip downloader juga sesuai standard official ATMEGA16u2 bukan CH340
#Warna board ungu seperti gambar

Feature :
-Microcontroller: ATmega328
-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limits) :6-20V

-Digital I/O Pins :14 (of which 6 provide PWM output)
-Analog Input Pins:6
-DC Current per I/O Pin :40 mA
-DC Current for 3.3V Pin :50 mA
-Flash Memory :32 KB (ATmega328) of which 0.5 KB used by bootloader
-SRAM :2 KB (ATmega328)
-EEPROM :1 KB (ATmega328)
-Clock Speed :16 MHz

Kelengkapan :
- Board Seperti Gambar, tanpa kabel

Tanya Pedagang
Tuliskan Ulasan Anda Sendiri
Hanya pengguna terdaftar yang bisa menulis ulasan. Harap Masuk atau buat akun