ks0002 keyestudio MEGA 2560 R3 / Arduino MEGA2560 R3 Compatible + USB Data Cable

Stok Tersedia
SKU
ARD016
Rp200.000,00

Introduction

Keyestudio Mega (core to ATmega2560) is a development board (used with16MHz crystal oscillator ) of microcontroller. There are 54 I/O (input/output ) digital interfaces (of which 14 are PWM outputs), 16 analog inputs and 4 UART (hardwareserial ports). With its bootloader, program can be downloaded directly with USB and you don’t need to use other external programmer. It can be driven directly by USB, or AC-to-DC adapter and battery.

Design of Power Supply :

There are two choices (direct power supply trough USB or external power supply) for the power supply system of Arduino Mega, and they can be Automatic switched. External power supply can be AC-to-DC adapter or battery. Voltage input of this control board is 6V~12V, but if the supplied voltage is greater than 12V, the voltage stabilizing device will be likely to be overheated and damaging Arduino MEGA. So we suggest the power supply should be 6.5~12V in operation and recommended supply is 7.5 or 9V.

Specification

Microcontroller:ATmega2560

Operating Voltage:5V

Input Voltage (recommended):7-12V

Input Voltage (limits):6-20V

Digital I/O Pins:54 (of which 15 provide PWM output)

Analog Input Pins:16

DC Current per I/O Pin:40 mA

DC Current for 3.3V Pin:50 mA

Flash Memory:256 KB of which 8 KB used by bootloader

SRAM:8 KB

EEPROM:4 KB

Clock Speed:16 MHz

Shipping  list:

 keyestudio MEGA 2560  development board  x1

 USB cable  x1

Wiki page:http://wiki.keyestudio.com/index.php/Ks0002_keyestudio_Mega_2560_R3_Development_Board

Tanya Pedagang
Tuliskan Ulasan Anda Sendiri
Hanya pengguna terdaftar yang bisa menulis ulasan. Harap Masuk atau buat akun